Lean Six Sigma Green Belt & Scrum Master (PSM I / CSM Prep)

Define Phase: Project Charter and VOC: Key Ideas, Worked Examples and Practice Questions

5 min read25 June 2026

Define Phase is one of the questions learners search for most around lean six sigma green belt & scrum master (psm i / csm prep) — usually because it sits at a decision point: choosing an approach, planning study time, or preparing for assessment.

Lean Six Sigma Green Belt & Scrum Master (PSM I / CSM Prep) covers it inside the curriculum, and this guide connects the question to the specific modules where it is taught, plus a practical way to master it.

Key points

  • •The question maps to specific modules: Module 2: Define Phase: Project Charter and VOC, Module 6: Control Phase: Sustaining Improvements, Module 3: Measure Phase: Data Collection and Process Baseline.
  • •Study it forward and backward: concept→example and example→rule.
  • •The quiz gate confirms when it has stuck.
  • •The randomised final exam (80% to pass) can test it in scenario form.

1. What the question is really asking

Behind every search like this is a practical decision. For define phase, the useful version of the question is: what would I do differently in real work or on the exam if I understood this well?

The answer depends on fundamentals the course teaches in sequence — which is why a structured curriculum beats scattered videos for topics like this one.

2. Where this appears in Lean Six Sigma Green Belt & Scrum Master (PSM I / CSM Prep)

The topic is anchored in this part of the curriculum:

  • •Module 2: Define Phase: Project Charter and VOC — covers 2.1 Introduction to the DMAIC Methodology, 2.2 Project Selection and Justification
  • •Module 6: Control Phase: Sustaining Improvements — covers 6.1 Statistical Process Control (SPC) Fundamentals, 6.2 Control Charts for Continuous Data (X-bar and R, I-MR)
  • •Module 3: Measure Phase: Data Collection and Process Baseline — covers 3.1 Process Mapping and Value Stream Mapping Fundamentals, 3.2 Data Types: Continuous vs. Discrete

3. How to master it

A practical route: read the lesson, attempt the exercise, then close the lesson and reproduce the result from memory. In Lean Six Sigma Green Belt & Scrum Master (PSM I / CSM Prep) that loop is built in — every lesson ends in a 12-question quiz at a 80% pass mark, and the labs give you a deliverable to check your work against.

4. How it is assessed

This topic is assessed in the lesson quizzes and can appear in the randomised final exam, which draws from the full course bank and requires 80% to pass.

  • •Revisit these modules before the exam: Module 2: Define Phase: Project Charter and VOC, Module 6: Control Phase: Sustaining Improvements, Module 3: Measure Phase: Data Collection and Process Baseline
  • •Free practice test first; timed paid papers before the real exam

Frequently asked questions

Is this covered in Lean Six Sigma Green Belt & Scrum Master (PSM I / CSM Prep)?
Yes — it is taught inside the modules listed above and reinforced by lesson quizzes and exercises. The final exam can draw on it.
How long does it take to get comfortable with this topic?
Most learners need two focused passes: the lesson plus a spaced review a week later, plus the exercises. The quiz gate shows when it has stuck.
Can I practise this topic for free?
Yes — the free practice test for this subject draws from the same bank as the exam, and the lesson exercises are included with enrolment.
Where do I go deeper?
Start with the modules above on the Lean Six Sigma Green Belt & Scrum Master (PSM I / CSM Prep) course page. If you want one-to-one help, live tuition is available at 15× the course price.

Study it properly: Lean Six Sigma Green Belt & Scrum Master (PSM I / CSM Prep)

Improve processes with DMAIC and lead agile teams as a Scrum Master.

More on this subject

All articles · Sitemap